⎝⎛星力捕鱼⎞⎠

江苏鑫都电热设备有限公司

categories of ⎝⎛星力捕鱼⎞⎠

Product Categories

contact us

Jiangsu Xindu Electric Heating Equipment Co., Ltd.

Contact: Li Qian Telephone: 0515-88616366
Mobile phone: 17712730739
Q Q: 3054453969
Email: jsxddr@163.com
Postcode: 224022
Address: No. 1 Industrial Park, Dazonghu Town, Yandu District, Yancheng City


Company ⎝⎛星力捕鱼⎞⎠

Your current location : ⎝⎛星力捕鱼⎞⎠ >> News >> Company News
  • Vacuum cleaning furnace use steps

    Vacuum cleaning furnace use steps The vacuum cleaning furnace is a mechanical device that effectively cleans the filter element of a chemical fiber component through a certain process. Here we introduce the steps of using the vacuum cleaning furnace. 1. Please check whether the voltage, water pressure and air pressure are normal before use. The low or high voltage of the electrical cabinet will affect the service life of the appliance; the buzzer will sound if the water pressure is low
    Release time: 2019-11-09 Clicks: 43

  • Air heater working principle, advantages and applications

    Advantages: 1. Through continuous circulation of the working medium, the flue gas is cooled, and the air heating effect is good, without using steam. The power consumption of the circulating pump of the electric air heater is only 10kW, which is extremely small compared with the heat power recovered in the flue gas. 2. The air heater system operates at low pressure, the medium is hot water, and the temperature is low. 3. Increase wall temperature, reduce flue gas corrosion, and prevent ash blockage. No setup required
    Release time: 2019-07-17 Clicks: 45

  • What are the more common causes of failure of thermal oil heaters?

    The common causes of failures of heat transfer oil electric heaters during production operations include: poor quality of heat transfer oil, leakage of heat transfer oil, excessive temperature of heat transfer oil system outlet, combined with low heat transfer oil flow rate, improper handling during power failure These four aspects account for more than 70% of the failure rate,
    Release time: 2018-09-17 Hits: 48

  • Air electric heater maintenance and repair

    The control of the protective air heater is a precision instrument. Be careful when transporting it. Prohibition of impacts and bumps. Some cylinders should be hoisted properly to avoid deformation and damage to internal heating elements. The air heater and control cabinet are placed in the warehouse, and it is prohibited to get rain. Defective maintenance fault 1: Digital display does not work. Check whether the air switch is closed and the control circuit is intact. Problem 2: Add
    Release time: 2018-04-14 Clicks: 142

  • Electric heater electric heating data

    Unit of measurement 1. Power: W, Kw1Kw = 3.412BTU / hr British thermal unit / hour = 1.36 (horsepower) = 864Kcal / hr 2. Weight: kg1Kg = 2.204621b (lb) 3. Flow rate: m / min 4. Flow rate: m3 / min, kg / h 5. Specific heat
    Release time: 2018-04-02 Clicks: 125

  • Structure, function and welding process of air duct type electric heater

    The air duct type electric heater is different from ordinary electric heaters in terms of structure and function. Of course, its production will also have a series of strict requirements. In addition to understanding the basic composition of air duct type electric heaters, Be familiar with its function and production process. The air duct type electric heater is mainly composed of two parts, the body and the control system. The heating element is made of stainless steel pipe.
    Release time: 2018-03-31 Clicks: 93

  • Jiangsu Xindu Electric Heating Equipment Co., Ltd. I wish you a Happy New Year!

    With the falling snow, 2017 has passed; in the footsteps of spring, 2018 has come. Looking back, we are full of pride and looking forward to the future, we are full of confidence. As a member of the enterprise in the new era, in today's thousands of sails and hundreds of races, what kind of behavior do we use to achieve our ideals and write the most beautiful Chinese life?
    Release time: 2018-02-09 Clicks: 80

  • Congratulations to the website of Jiangsu Xindu Electric Heating Equipment Co., Ltd.

    In order to meet the needs of the company's development, establish a good image of the company, and meet customers' understanding of the company's products and services through the Internet. The company's website was finally launched on March 6, 2017, which marked the information of Jiangsu Xindu Electric Heating Equipment Co., Ltd Chemical construction has taken a solid step. The layout design is fresh and lively, the website structure is concise and clear, the content is rich and informative, the web
    Release time: 2017-03-07 Click times: 267

  • What are the steps to calculate electric heater power oil?

    1: According to the process, draw the process flow of heating (not involving material form and specifications). 2: Calculate the heat required for the process. 3: Calculate the heat and time required when the system starts. 4: Redraw the heating process flow chart, consider the appropriate safety factor, and determine the total power of the heater. 5: Determine the walnut material and power density of the heating element. 6:
    Release time: 2017-02-11 Clicks: 58

  • Various products and performance parameters of electric heaters

    1. Steel card sleeve electric heater Steel card sleeve electric heater has the characteristics of reliable connection, high pressure resistance, good sealing and repeatability, convenient installation and maintenance, and safe and reliable work. 2. Steel flared electric heater The flared electric heater is a connector in a pipeline system with oil, water, gas and various corrosive materials as the medium. 3. Welding electric heater
    Release time: 2017-02-07 Clicks: 46

  • Assembly process of electric heating element and electric heater

    1Electric heating elements used in the form of bare heating wires and ceramic (ceramic) plates, tubes, supports and mica boards for electric heaters are used to support, insulate and heat insulation, and electric heating elements made of spiral heating wire or linear heating wire directly And heaters, such as electric furnaces, hair dryers, heaters and multi-type furnaces. 2 metal tubular electric heating element will spiral
    Release time: 2017-02-06 Clicks: 25

  • Working principle of electric heater

    1. Electric heater performance The electric heater (electric heating tube) uses a metal tube as its shell. Spiral electric heating alloy wires (nickel-chromium, iron-chromium alloy) are evenly distributed along the central axis of the tube. The gap filling compaction has good insulation and thermal conductivity. The two ends of the magnesia are sealed with silica gel or ceramic. This metal armored electric heating element can heat air, metal molds and various liquids. 2. Power up
    Release time: 2017-02-03 Clicks: 48

  • History of the development of electric heaters

    The development of electric heaters, like other industries, follows these rules: 1. Gradually promote from advanced countries to countries around the world. 2. Gradually develop from urban to rural. 3. From collective use to the family and then to the individual. 4. The product develops from low-grade to high-grade. Most of the electric heaters produced in the 19th century were poor.
    Release time: 2017-02-02 Clicks: 36

  • Industrial boiler energy saving project is the focus of Shanghai's industrial energy efficiency improvement this year

    It was learned at the Forum on Energy Efficiency Management Status and Development Trends that industrial boiler and motor system energy conservation projects are the focus of Shanghai's industrial energy efficiency improvement this year. According to reports, there are more than 9,000 industrial boilers in service in Shanghai, with an annual energy consumption of about 4.5 million tons of standard coal, of which coal-fired boilers account for about one-third of the total, but the energy consumption exceeds 5
    Release time: 2017-02-02 Clicks: 24

  • Technical characteristics of air heater

    Technical characteristics of air heater 1. It can make the air heat to a very high temperature, up to 850 ℃, and the temperature of the shell is only about 50 ℃. 2, high efficiency: up to 0.9. 3. Heating and cooling rate block, up to 10 ℃ / S, fast and stable adjustment. The temperature of the controlled air will not lead and lag, which will make the temperature control drift, which is suitable for automatic control.
    Release time: 2017-02-01 Clicks: 45

  • Comparison of steam boilers with thermal oil boilers

    Steam boilers appeared earlier and have been used by people. They are widely used for drying and heating in many industries such as petroleum, chemical industry, grease, papermaking, wood-based panels, wood, food, rubber and other industries. For many years, the role of steam boilers cannot be ignored, and it cannot be underestimated. & nb
    Release time: 2017-01-31 Click times: 26

  • How to design an electric heating oil furnace?

    1. Design thermal load. There should be some room between the heat load and the effective heat load of the heat-conducting oil furnace, and this range is generally 10% to 15%. 2. Design temperature. The design temperature of the heat-conducting oil furnace is determined by its use temperature, and it should be designed in accordance with the relevant provisions in GB9222 "Strength Calculation of Water Tube Boiler Original Parts". 3. Design pressure. guide
    Release time: 2017-01-24 Hits: 46

  • What are the operating procedures for electric oil heaters?

    Article 1. The operators of electric heating oil-conducting oil furnaces shall be trained in the knowledge of electric heating oil-conducting oil furnaces, and shall be certified by the local boiler safety supervision agency. Article 2 Units using electric heating oil-conducting oil furnaces must formulate operating rules for electric heating oil-conducting oil furnaces. The operating procedures shall include the operation methods of starting, running, shutting down, emergency shutting down, etc. of the electric heating heat-conducting oil furnace and shall pay attention to
    Release time: 2017-01-20 Clicks: 32

  • Air pollution from boilers is becoming increasingly serious, and the replacement of small boilers by thermal oil heaters is a general trend

    The heat transfer oil uses direct electricity to heat the heat transfer oil. It is characterized by no pollution, and because the high temperature oil temperature machine is placed next to the object to be heated, the heat source has a high profit margin, and the operation is simple and convenient. personnel. &
    Release time: 2017-01-16 Clicks: 26

  • The new "Environmental Protection Law" promotes the reform of coal-fired boilers to convert electricity to heat and heat-conducting oil furnaces

    On January 1, 2015, the newly amended "Environmental Protection Law" came into effect. The new law established daily sanctions, seizures, restrictions on production and production, and information disclosure to point "heavy punches" to sewage companies. Yesterday, the Ministry of Environmental Protection publicly solicited opinions on the four measures related to the new law. It was clear that polluters were fined for environmental violations.
    Release time: 2017-01-16 Clicks: 59

online service
share it
必赢真人娱乐 天天电玩城 真人游戏平台注册 七乐彩