⎝⎛星力捕鱼⎞⎠

江苏鑫都电热设备有限公司

categories of ⎝⎛星力捕鱼⎞⎠

Product Categories

contact us

Jiangsu Xindu Electric Heating Equipment Co., Ltd.

Contact: Li Qian Telephone: 0515-88616366
Mobile phone: 17712730739
Q Q: 3054453969
Email: jsxddr@163.com
Postcode: 224022
Address: No. 1 Industrial Park, Dazonghu Town, Yandu District, Yancheng City


Industry Information

Your current location : ⎝⎛星力捕鱼⎞⎠ >> News >> Industry information
  • Do you know the operation steps of the horizontal vacuum cleaning furnace?

    Do you know the operation steps of the horizontal vacuum cleaning furnace? In the first step, put the workpiece to be cleaned into the hanging basket, lift it into the furnace, close the furnace cover and press it tightly. In the second step, open the main water valve, adjust the pressure of the water pressure controller to 0.1Mpa, and adjust the vacuum water spray. The water flow rate of the shower scrubber is between 60 and 100L / h. The third step is to turn on the main power, turn on the meter switch, and delay on.
    Release time: 2020-01-17 Click times: 13

  • Advantages and characteristics of electric heating oil furnace

    Advantages: 1. The high-quality heat source heat transfer oil heating system can output hot oil up to 350 ° C for hot users under normal pressure liquid phase; the heat transfer oil heating systems use Fuji temperature control instruments from Japan, and PID self-tuning intelligent temperature control Technology, the control precision can reach a temperature of about ± 1 ℃, and the temperature range used is accurately controlled; the main power source for heating uses a solid-state module without contact
    Release time: 2020-01-04 Clicks: 13

  • Introduction of safety precautions for thermal oil furnace

    Heat transfer oil heater is our common equipment, so what are the safety measures for heat transfer oil heater? The main danger of thermal oil heaters is fire. Once the heat-conducting oil electric heater leaks from the heat-conducting oil furnace heating system, it will ignite or spontaneously ignite due to its high temperature and contact with or close to the flame, causing a fire. In addition, the thermal oil furnace will
    Release time: 2019-12-28 Clicks: 17

  • Factors affecting air heater

    Influencing factors of air heaters 1. Increasing the gas inlet flow rate of air heaters can enhance the convective heat transfer of air electric heaters and reduce the surface temperature of electric heating elements in air heaters. Service life, and reduce the heat loss of electric air heaters, so the efficiency of the air heat exchanger is improved, but if the speed is too high
    Release time: 2019-12-21 Clicks: 29

  • Safety operation regulations for small thermal oil boilers

    1. The operator should be familiar with the structure and principle of the furnace and the basic requirements of production heat equipment, and continuously summarize experience in practice, control the thickness of the coal seam, achieve full combustion, reduce smoke from the chimney, and ensure that the equipment is operating safely and efficiently status. 2. The new oil or the furnace restarted for a long time should be heated in stages according to the dehydration requirements of the thermal oil. 3. The outlet oil temperature should be set at 28
    Release time: 2019-12-14 Clicks: 18

  • Heater introduction

    Meltblown processes require a lot of hot air. The compressed air output by the air compressor is sent to the air heater for heating after being dehumidified and filtered, and then sent to the meltblown die head assembly. The air heater is a pressure vessel. At the same time, it must resist the oxidation of high temperature air, so the material must be stainless steel. The heating element of the air heater is a stainless steel electric heating tube. Multiple heater cavity
    Release time: 2019-12-07 Clicks: 16

  • What are the characteristics of air duct electric heater

    There may be many people using the duct electric heater, but there are also many people who do not know what the characteristics of the duct electric heater itself are. Now let ’s learn together Features it. The air pipe electric heater is mounted on a fixed bracket by a stainless steel electric heating pipe with fins. The air pipe electric heater can be embedded in the air duct or static pressure box, and connected
    Release time: 2019-11-23 Clicks: 18

  • Safety precautions for heat transfer oil heaters

    The main danger of thermal oil heaters is fire. Once the heat-conducting oil electric heater leaks from the heat-conducting oil furnace heating system, it will ignite or spontaneously ignite due to its high temperature and contact with or close to the flame, causing a fire. In addition, the heat conduction oil furnace will also explode due to the heat conduction oil with water and other reasons. To prevent the accident of thermal oil heater
    Release time: 2019-11-16 Clicks: 17

  • Introduction of explosion-proof electric heater

    Working principle The fluid explosion-proof electric heater is a type that consumes electrical energy and converts it into heat to heat the material to be heated. During work, the low-temperature fluid medium enters its input port under pressure through the pipeline, and along the specific heat exchange flow path inside the electric heating container, the path designed by the principle of fluid thermodynamics is used to take away the high-temperature thermal energy generated during the operation of the electric heating element. Make heated medium
    Release time: 2019-11-02 Clicks: 16

  • Air heater use precautions

    Many end-users use the ventilation mode to cool the host when it is turned off. "This is wrong." There is a process for normal shutdown: 1. When shutting down, the ignition plug will work again, completely burning the remaining diesel in the combustion chamber for reuse When the heater is on, it can ignite smoothly. 2. When the remaining diesel is completely burned, the ignition plug will stop working and the fan will start working at the same time.
    Release time: 2019-10-25 Clicks: 18

  • Regular maintenance and maintenance method of heat transfer oil heater

    Regular maintenance and maintenance methods of heat-conducting oil heater 1. Water will corrode the heat-conducting oil pump, so it is forbidden to use the oil pump to evacuate the water-containing substances, and use the water pump to evacuate. 2. For substances containing a large amount of solvents, please remove most of the solvents in the oven first, and then use a heat transfer oil pump to evacuate. 3. Use the vacuum pump in the correct order to prevent back suction. 4, finished
    Release time: 2019-10-19 Clicks: 15

  • Liquid heater faq

    During the use of liquid heaters, we will encounter some problems that prevent the equipment from working properly. For this reason, Xindu Electric has sorted out the five common causes and treatment methods of liquid heaters, hoping to help you! 1. Poor circulation of the pipeline Solution: Turn on the air release switch of the heater and the pipeline to release the gas in the pipeline. Generally, the problem of poor circulation of the pipeline can be solved
    Release time: 2019-10-08 Clicks: 21

  • Performance and workflow of liquid heaters

    A liquid heater is a device mainly used to heat liquids. It converts electrical energy into heat and heats materials. Maybe in daily life, it is used in some electrical equipment, so many people don't know much about its performance and working process, but in fact, whether it is to purchase or use, these two points must be understood clearly Yes, so next
    Release time: 2019-09-30 Clicks: 20

  • Analysis of the characteristics of heat-conducting oil electric heaters and what are the requirements for their use?

    Heat-conducting oil electric heater is made of combustible objects such as heavy oil, light oil, combustible gas, coal, etc., and the heat-conducting oil is an organic carrier. A circulating oil pump is used to force the liquid phase circulation of the heat-conducting oil to transfer heat to the heating equipment and return to the large boiler for heating. Heat transfer oil, which is often called heat medium oil, is used as an intermediate heat transfer medium in the boiler industry for 50 to 60 years.
    Release time: 2019-09-12 Clicks: 26

  • Outstanding advantages of air heaters

    Air heaters have gradually been widely used and have gained the trust of customers. Previously, we shared what problems to pay attention to when selecting air heaters, and the main reason why air heaters can be widely used is also related to its performance. Closely related, today we will take a closer look at the outstanding advantages of air heaters: 1. The air heater system is at
    Release time: 2019-08-24 Clicks: 20

  • Standard inspection items when purchasing a thermal oil heater

    As an important large-scale heating equipment, heat-conducting oil heaters must be taken seriously when purchasing. So when the company chooses a heat transfer oil heater, what specific indicators are used to measure the quality of the heat transfer oil heater? What checks are we going to make? It is divided into three aspects: inspection before start, start, and shutdown operation. I. Inspection before startup
    Release time: 2019-08-17 Clicks: 22

  • Safety precautions for electric heating oil-conducting oil furnace

    Heat transfer oil heater is our common equipment, so what are the safety measures for heat transfer oil heater? The main danger of thermal oil heaters is fire. Once the heat-conducting oil electric heater leaks from the heat-conducting oil furnace heating system, it will ignite or spontaneously ignite due to its high temperature and contact with or close to the flame, causing a fire. In addition, the thermal oil furnace will
    Release time: 2019-08-10 Clicks: 32

  • Introduction to the working principle of electric air heaters

    Introduction to the working principle of the air electric heater The air electric heater is a heat exchange device that is converted into heat energy. It has the advantages of convenient energy supply, compact structure, automatic temperature control, convenient installation and maintenance, and no pollution. The electric heater is composed of a tubular container and an electric heating element, and is equipped with a temperature control cabinet (station). The control part uses advanced digital circuits, integrated power
    Release time: 2019-08-03 Clicks: 36

  • What are the advantages of the performance characteristics of the transformer oven?

    Transformer oven performance characteristics: two sets of over-temperature alarm system, fin heater with low surface temperature, full / intermittent large air volume ventilation method, ensuring the safety of oven operation The advanced hot air circulation system guarantees good temperature uniformity in the box. Low thermal conductivity high-quality aluminum silicate cotton insulation and unique insulation cotton filling method ensure the insulation performance of the oven. alone
    Release time: 2019-07-24 Clicks: 23

  • How to choose electric heating tube? What is the basis?

    The electric heating pipe belongs to the name: metal tubular electric heater element, which is placed in the metal pipe, the electric heating pipe is tightly filled with crystalline magnesium oxide powder with good heat resistance, thermal conductivity and insulation in the gap. Processed. It is most common in the use of electric heating equipment. How to choose a good electric heating pipe when purchasing? It is a science
    Release time: 2019-07-04 Clicks: 32

A total of 93 20 Articles per page Pages: 1/5
2 3 4 5 下一页 尾页 1 2 3 4 5 Next Last
online service
share it
必赢真人娱乐 天天电玩城 真人游戏平台注册 七乐彩